Your Cart

  • Your cart is empty!
Free shipping for orders under 10km
Why Every Home Needs a Surge Protection Device (SPD)
Ahmad Foysal Sep 02, 2026 1,565

Why Every Home Needs a Surge Protection Device (SPD)

A voltage surge is a very short spike, often caused by lightning nearby or by large loads switching on and off. It lasts only microseconds, which is too fast for an ordinary breaker or voltage protector to react to, but it can be enough to damage TVs, routers, inverters and anything with a circuit board.

What does an SPD do?

A Surge Protective Device (SPD) is installed in your distribution board. When a spike arrives, it diverts the extra energy safely to earth, keeping the voltage reaching your appliances within a safe level. Once the surge passes, the line continues as normal.

Which SPD do I need?

  • 2-pole (L+N): for a normal single-phase home or shop.
  • 4-pole: for three-phase supplies (L1, L2, L3 + N).
  • DC SPD: for solar PV systems, installed on the DC side between the panels and the charge controller or inverter.

What to look for

  • Uc (maximum continuous voltage): for example 275V for single-phase or 385V models.
  • Imax (maximum discharge current): a higher value such as 40kA handles bigger surges.
  • Up (protection level): lower is better, for example 1.4kV or less.
  • Replaceable modules: plug-in modules can be replaced without changing the whole unit.

Important

An SPD only works properly with a good earthing system, so ask your electrician to check your earth connection during installation. An SPD and a voltage protector do different jobs, and together they give the best protection.

See our surge protection devices or WhatsApp us at 01303705753 for advice.