Save Electricity With Timers and Motion Sensors
A lot of electricity is wasted by things that stay on longer than needed: stairway lights burning all night, gate lights on during the day, or a water pump left running. Timers and sensors switch them for you automatically, so you save power without having to remember.
Motion sensor light holders
Fit a motion sensor holder on a stairway, corridor or balcony light and it switches on only when someone walks by, then off again after a set time. This saves electricity and helps bulbs last longer.
Daylight (dusk-to-dawn) sensors
A daylight sensor switches outdoor lights on when it gets dark and off at sunrise. It is ideal for gates, gardens, street lights and factory yards. AC models suit mains lighting, and 12V DC models suit solar and battery lights.
Plug-in and DIN-rail timers
A plug-in digital timer can switch lights, small pumps or chargers on and off at fixed times every day. For heavier loads and fixed wiring, a DIN-rail programmable timer (for example 15A or 30A) can run lighting circuits, signboards and pumps on a weekly schedule.
MCB timers
An MCB timer works like a normal breaker but switches off automatically after a set time (for example up to 2 hours). It is useful for motors and geysers that are often forgotten.
Tips
- Always check the maximum load of the timer or sensor and do not exceed it.
- Use plug-in timers for light loads only; use DIN-rail timers or a contactor for motors.
See our timers and sensors, or WhatsApp us at 01303705753.